HOME > Products > Super Air Heater > SEN (sensor built in)

ISO9001:2000 certification

ISO9001:2000

Super Air Heater SEN (sensor built in)

The Super Air Heater is a heater that continuously supplies high temperature hot air of up to 800°c.

 

Major applications

  • Soldering and preheating
  • Bonding and thermal welding
  • Drying
  • Other thermal processes
 

Soldering

Soldering
  • Targeted soldering
    • Sharp air outlet heats minute spots.
    • Minimize thermal shock for other parts.
    • Easy adjustment by changing temperature and flow.
    • Rapid temperature rise for intermittent heating.
    • Suits flexible circuit boards and tiny parts.
  • Preheating
    • Allows the preheating of minute spots before applying the tool, for the best results at minimum effort.

Thermal caulking

Thermal caulking
  • Thermal caulking
    • Local heating without affecting other parts.

Heating of coils

Heating of coils
  • Heating before coiling the metal wire
    • By heating it, fine lines can also be coiled.
  • Hardening and self-welding of insulated coil resin
    • Energy saving heat source thanks to spot heating.
    • Best heating for self-welding coreless coils.

Shrink film packaging

Shrink film packaging
  • Heat uniformly with the wide nozzle.
  • Set the appropriate heat quantity easily.

Heating of heat shrinkable tubes

Heating of heat shrinkable tubes
  • Heating of heat shrinkable tubes
    • Suitable for heat shrinkage of tiny parts, wire and unity.
    • Apply heat to local spots of tubes.

Finish processing of cosmetics

Finish processing of cosmetics
  • Polishing of cosmetics
    • Adjust the heat easily.
    • Reproducible processing.
  • Clean spot heating by air

Glass processing

Glass processing
  • Preheating for glass processing
    • Ideal when preheating just target portions prior to using a burner for the process.
    • Frequent power on-and-off of heating to minimize energy loss.
  • Tip-off preheating
    • Preheat tiny spots uniformly.
 

Features

As a special heating element is employed as heating source, the heater immediately reaches the desired temperature. The integrated sensor and temperature control provide the feature of stable temperature output.

 
 

Dimensions

  • AS type
    AS type
  • BS type
    BS type
  • CS type
    CS type
 

How to use to it

How to use to it
 

Photo

SEN
SEN
 

Specifications

No. Voltage
(V)		 Power
(W)		 Model a
(mm)		 b
(mm)		 c
(mm)		 d
(mm)		 e
(mm)		 f(mm)
Outlet inside dia.		 g(mm)
Protection tube
outside dia.
1 100 350 AS 11 10 10 70 - 8.5Φ 13Φ
2 100 350 BS 11 10 10 70 10 2Φ 13Φ
3 100 350 CS 11 10 10 50 32 1 x 26 14Φ
4 100 650 AS 11 15 10 110 - 12.5Φ 19Φ
5 100 650 BS 11 15 10 110 10 2Φ 19Φ
6 100 650 CS 11 15 10 65 57 1 x 26 19Φ
7 100 1000 AS 11 15 10 135 - 12.5Φ 19Φ
8 100 1000 BS 11 15 10 135 10 2Φ 19Φ
9 100 1000 CS 11 15 10 100 45 1 x 26 19Φ
10 200 200 AS 11 10 10 70 - 8.5Φ 13Φ
11 200 200 BS 11 10 10 70 10 2Φ 13Φ
12 200 200 CS 11 10 10 50 32 1 x 26 14Φ
13 200 440 AS 11 10 10 90 - 8.5Φ 13Φ
14 200 440 BS 11 10 10 90 7 2Φ 13Φ
15 200 440 CS 11 10 10 65 33 1 x 26 14Φ
16 200 650 AS 11 15 10 110 - 12.5Φ 19Φ
17 200 650 BS 11 15 10 110 10 2Φ 19Φ
18 200 650 CS 11 15 10 65 57 1 x 26 19Φ
19 200 1000 AS 11 15 10 135 - 12.5Φ 19Φ
20 200 1000 BS 11 15 10 135 10 2Φ 19Φ
21 200 1000 CS 11 15 10 100 45 1 x 26 19Φ
 

Precautions for use (make sure to read before use)

  • Make sure to turn on the air supply before turning ON the power.
    (Supplying electricity to the heater without the airflow may cause the heater element to disconnect.)
  • Make sure to turn OFF the power before stopping the air supply.
  • Use with less than rated voltage may shorten the heater life span.
  • Use the heater with an air pressure below 0.5 MPa.
  • When you used the heater near its temperature limit, ensure sufficient airflow is provided. (Insufficient airflow rate may shorten the heater life span.)
    • Standard airflow rate to obtain hot air of maximum temperature 800°c with the rated voltage.

E.g.: The airflow rates shown below are the minimum rates. Do not use the heater with lower than the flow rates shown below.

 
Heating rating 100V-100W 100V-200W 100V-350W 100V-650W 100V-1000W
Airflow rate 5liters/min 10liters/min 15liters/min 30liters/min 60liters/min
Heating rating 200V-200W 200V-440W 200V-650W 200V-1000W 200V-2000W
Airflow rate 10liters/min 15liters/min 30liters/min 70liters/min 150liters/min

Other heater models,such as ones without sensors and clean heaters,are also available.

GO TOP