HOME > Products > Super Air Heater > SAH (with ceramic bases)

ISO9001:2008 certification

ISO9001:2008

Super Air Heater SAH (with ceramic bases)

SAH with ceramic base keep high stability of temperature because leramic is used for fixing quartz.

Major applications

Soldering

Soldering
  • Targeted soldering
    • Sharp air outlet heats minute spots.
    • Minimize thermal shock for other parts.
    • Easy adjustment by changing temperature and flow.
    • Rapid temperature rise for intermittent heating.
    • Suits flexible circuit boards and tiny parts.
  • Preheating
    • Allows the preheating of minute spots before applying the tool, for the best results at minimum effort.

Thermal caulking

Thermal caulking
  • Thermal caulking
    • Local heating without affecting other parts.

Hardening and drying of adhesives

Hardening and drying of adhesives
  • By heating just part of the adhesive locally, you can process it efficiently.

Glass processing

Glass processing
  • Preheating for glass processing
    • Ideal when preheating just target portions prior to using a burner for the process.
    • Frequent power on-and-off of heating to minimize energy loss.
  • Tip-off preheating
    • Preheat tiny spots uniformly.

Features

This super Air heater uses a unique construction for its heating element. The design efficiency for conducting heat from the heating element to the air is 80%, or higher.

Dimensions

Type 1 with a ceramic bases

  • A type
    A type
  • B type
    B type
  • C type
    C type

Type 1.5 with a ceramic bases

  • A type
    A type
  • B type
    B type
  • C type
    C type

Photo

SAH (with ceramic bases)

Specifications

No. Voltage
(V)		 Power
(W)		 Model a
(mm)		 b
(mm)		 c
(mm)		 d
(mm)		 e
(mm)		 f(mm)
Hot air outlet
dimensions		 g(mm)
External diameter
of the quartz glass
1 100 350 1A 13 11 13 65 - 8.5Φ 10.5Φ
2 100 350 1B 13 11 13 75 - 2Φ 10.5Φ
3 100 350 1C 13 11 13 77 - 0.5 x 26 10.5Φ
4 100 650 1.5A 13 11 30 75 - 12.5Φ 15Φ
5 100 650 1.5B 13 11 30 85 - 2Φ 15Φ
6 100 650 1.5C 13 11 30 81 - 0.5 x 26 15Φ
7 200 1000 2A 13 11 30 113 - 12.5Φ 15Φ
8 200 1000 2B 13 11 30 118 - 2Φ 15Φ
9 200 1000 2C 13 11 30 122 - 0.5 x 26 15Φ

Precautions for use (make sure to read before use)

  • Make sure to turn on the air supply before turning ON the power.
    (Supplying electricity to the heater without the airflow may cause the heater element to disconnect.)
  • Make sure to turn OFF the power before stopping the air supply.
  • Use with less than rated voltage may shorten the heater life span.
  • Use the heater with an air pressure below 0.5 MPa.
  • When you used the heater near its temperature limit, ensure sufficient airflow is provided.
    (Insufficient airflow rate may shorten the heater life span.)
    •Standard airflow rate to obtain hot air of maximum temperature 800°c with the rated voltage.

E.g.: The airflow rates shown below are the minimum rates. Do not use the heater with lower than the flow rates shown below

Heating rating 100V-100W 100V-200W 100V-350W 100V-650W 100V-1000W
Airflow rate 5liters/min 10liters/min 15liters/min 30liters/min 60liters/min
Heating rating 200V-200W 200V-440W 200V-650W 200V-1000W 200V-2000W
Airflow rate 10liters/min 15liters/min 30liters/min 70liters/min 150liters/min

Other heater models,such as ones without sensors and clean heaters,are also available.

GO TOP