ISO9001:2008 certification

Overview

Spot Heater effectively heats objects by collecting light with the combination of a halogen lamp and specially designed elliptic reflector.

*Measurement condition
- Voltage 100V
- Heating object SUS304 (2t x 200 x 200)
- Measured at the center of the exposure
- This is the graph of the temperature measured by the thermocouple attached at the bottom of the heating object.

Advantage

• Rapid rise of heating temperature up to 1000 degrees Celsius.
• Available for customization of the collecting radius and the focal point distance for various applications.
• Silica glass cover is available for protection of the mirror surface.
• Silica glass cover is available for protection of the mirror surface.

Use

• Contact-less heating
• Various soldering
• Sintering of ceramics
• Metal hardening adjustment
• Preheating for bending work
• As a heating source for burning or drying process
• Heating of specimens in a vacuum chamber
• Spot heating of resin end surface or shrinkage of heat shrinkable tubes
• Clean heating
• Various heating processes that require a high level of cleanness
• Preheating of semiconductors

Precautions

• Do not apply any voltage above the rated voltage (or the product life could be shortened).
• Make sure to add a fast-blow breaker on the power side (we recommend you use our BC power).
• Although there is no particular limitation of lighting direction, don't apply any vibration or shocks while lighting.
• Water-cooling is needed for HSH-1 and HSH-3.
  Please use under the following conditions: water flow is 1 - 3 litter /min, water quality is PH 4 - 8 and water temperature is 15 - 22 degrees Celsius.