HOME > Products > Spot Heater > Lowcost Beam Heater LCB-50

ISO9001:2008 certification

ISO9001:2008

Lowcost Beam Heater LCB-50

This heater provides long focal distance despite light condensing diameter  Φ2 and low price products.
It can be used to meet clean heating of untouched or quich heating requirements.

Major applications

  • Various heat processing required high purity
  • Preheating of semi-conductor
  • Drying of printed letters
  • Heating evaluation of disk
  • Fusion bonding of plastics

Soldering

Soldering
  • Targeted soldering
    • Quick rise and fall for easy temperature control.
    • You can even heat spots as the object moves.
    • Narrow spot heating minimizes heat stress sustained by neighboring parts.
    • Enables soldering for flexible circuit boards and tiny parts.
  • Preheating
    • Helps ensure good soldering with minimum effort for lead-free soldering by preheating the desired spot.

Preheating

Preheating
  • Clean preheating for soldering
  • LCB-50 can increase the temperature of its focal position up to 600 °C (1,112 °F).
  • By defocusing, it can heat a wider area.

Fusion bonding of plastics

Fusion bonding of plastics
  • Fusion bondin of plastics
    • After binding two plastics, fusion bond them.
    • The spot heater can heat only target areas.

Features

A halogen lamp provides high color temperature as an optical device light source, and it is easy to reach high temperatures using the completely gold plated mirror. The mirror is a round mirror (360° full perimeter). By collecting heat energy from the halogen lamp with the mirror, the heater can offer highly efficient energy with little power.
*It is possible to attach front glass protecting effect of smoking generated by bondeling. (option)

 
 

Dimensions

  • Main body Main body
  • L-shaped braket L-shaped braket

Photo

LCB-50

Specifications

  • Lamp rating: 12 V 100 W
  • Focal distance: 35 mm
  • Light condensing diameter: 2 mm
  • Maximum heating temperature: 600°c
  • Average life: 2000h
    Saving the lamp voltage will extend (the life.)
  • The local distances above are the dimension for which the smallest spot diameter can be obtained.
  • By adjusting the local distance, the spot diameter size and the heat can be changed.
    (Using our adjuster BC power supply for light beam heater, you can easily adjust the voltage.)

Caution

  • Pay special attention to hig temperature of lamp house.
  • Do not close the combustibles to heting requirements.
  • Connect the breaker to the power supply side.
    (Recommend to use our adjuster BC power supply.)
  • When using halogen lamp, wear sunglasses or use coloured panel for avoiding dazzling.
 
GO TOP