ISO9001:2008 certification
Solar Simulator INB-300/500
This device is a simulated solar light source, accelerated performance testing of solar cell power, fading test, test equipment available for degradation.
Major applications
- For inspection of accelerated power generation of solar cell as quasi-sunlight.
- For inspection of vanishing paint and others.
- For the light resistance test of plastics and others.
Features
Irradiate sunlight to the work uniformly 80% or higher.
- Irradiance *INB-300
Area 
100mmabout 3.4 SUN Area 150mmabout 1.8 SUN - Uniformity *with integrator Lens (100mm
)
90% (IEC60904-9/JIS Class C)
Photo
Wavelength
Dimensions
* Mounting is optional.
Specifications
Rating
| Type | INB-300 | INB-500 | |
|---|---|---|---|
| Input rating | AC100V 50/60Hz | ||
| Input voltage change tolerance level | AC90 - 110V | ||
| Input power (Consumption electricity) | 600W (max) | 1000W (max) | |
| Use lamp | Xenon Lamp | ||
| Lamp spec | Rating voltage | DC20V±2V | |
| Rating capacity | 300W | 500W | |
| Rating current | 15A | 25A | |
| Lamp life | 1000h | ||
Specifications
| Control system | Shutter ON/OFF (Open / Close) Shutter open / Shutter timer control function 0-63 phases output variable steps (Light control) Lamp hour meter |
|---|---|
| Ext remote | Possibility |
| Optical axis adjustment | X Y Z stage (hand-operated fine adjustment) Lamp arc position confirmation monitor |
| Irradiation time | Setting range(0.1 - 999.9sec manual operation) |
| Reflection mirror method | Oval mirror reflection |
| Remote control | Signal control by the parallel I/O |
| Remote connector | D sub 25pin connector |
| Lamp On-Off | Power supply breaker SW On - D-sub pin No12 ON |
| Cooling system | forced air-cooling (Fan) |
| Reboot time | about 10 minutes later (from lamp off) |
| Protection function | Lamp life / Lamp lighting failure / Lamp start in the whole cooling |
| Temperature protection | Protection with the thermostat |
| Dimensions | 230 (W) × 330 (D) × 506 (H) |
| Weight | About 25 Kg |
