HOME > Products > Super Air Heater > Non-Contact Temperature Controller DHC-NT

ISO9001:2000 certification

ISO9001:2000

Non-Contact Temperature Controller DHC-NT

Using halogen lump heater, make it possible to heat cleanly without contact.
By measuring withnon-contact sensor, controll the temperature to the object.
Contribute to improve quality, save labor,shorten tact time and keep safety.

Major applications

  • Soldering and preheating of ceramic or glass circuit printed board.
  • Bonding, drying of ink and paint.
  • Heat shrinking tube and packing.
  • Preheating film.
  • Any other applications needed non-contact thermal.

Features

  • With Non-contact sensor, this controller make it possible to measure to the work and to secure the optimum temperature expected.
  • Furnish with warning of necessary output power and keep safety.

Constitution

constitution

Photo

DHC-NT

Specifications

CONTROLLER DHC-NT
SUPPLY(V) AC 100/200V(50/60Hz)
HALOGEN HEATER(W) MAX 100V 1KW/200V 2KW
TEMP,RANGE(℃) 0-500℃
CONTROL SYSTEM PID/CORRENT OUTPUT
ARARM LOOP DIAGNOSI DEVIATION HIGH/LOW LIMIT
ACCURACY ±5℃ OF READING TEMPERATURE
CONTACT CAPACITY AC250V 3A DC30V 1A
EXTENSION SW 1 POINT
INPUT METHOD NON-VOLTAGE CONTACT INPUT
DIMENSIONS / WEIGHT W161×H160×D216/3Kg

SENSOR HEAD
FIELD OF VIEW Φ5/100mm
SENSING ELEMENT/WAVE LENGHT THEMOPILE/8 -14μm
AMBIENT TEMPERATURE/ENVIRONMENTAL HUMIDITY 0-65℃ /
35-85%RH(WITHOUT DEW CONDENSATION)
VIBRATION RESISTANCE 3G(20-50Hz?IN ACCORDANCE WITH JIS C9011)
WATER RESISTANCE IP67
MEASURING RANGE
/DISPLAY RANGE		 0-500℃/(-20-520℃)
POSSIBLE OVER 500℃, BY OPTION
RESPONSE TIME 500msec./90%
ACCURACY ±1%OF READING VALUE OR±℃,WHICHEVER IS GREATER
EMISSIVITY RATIO (ε) ADJUSTMENT 0.10-1.20
DIMENSIONS/WEIGHT Φ30×124mm /320g
GO TOP